Bio-FT

The conversion of product gas from thermal gasification into FT- (Fischer-Tropsch) fuels for transportation applications is the focal point of this field of activity.

BIOENERGY 2020+ works on the continuous development and market implementation of FT-synthesis for 2nd generation biofuels.

Within Fischer Tropsch synthesis, the product gas, after the removal of catalyst poisons, is converted by a catalytic process at 200-300°C and under pressure into the Fischer Tropsch raw product, which is then upgraded to gain a higher energy content. With a test rig of a capacity of 5 kg/day, parameter variations and catalyst screening are carried out. The FT-raw product is analysed and further upgraded (partial hydro-treating) to the final FT-diesel.

The knowledge obtained from these fundamental research is used to design and build a pilot plant with a capacity of about 1 barrel/day. With this infrastructure it will be possible to product amounts of FT-fuels that can be used for engine tests.

Lab-Scale FT-Anlage
Fischer-Tropsch laboratory facility with gas scrubbing: The synthesis gas is converted to FT diesel in the catalyst filled slurry reacotr at temperatures between 200 and 300 °C and at pressures from 20 to 30 bar. Figure: Compression (left), FT reactor (centre); product separation (right)

Contact Persons

Contact Us

We invite you to contact our office under office@bioenergy2020.eu or a member of our personnel directly from this website. Fast and simple.

To Our Team Page

References

  • RENEW (renewable fuels for advanced powertrain) funded by the 6th EU Research Framework Programme
  • Polygeneration
  • II-1-3 Synthetic biofuels

Partners

  • Institute of Chemical Engineering, Vienna University of Technology
  • Institute for Internal Combustion Engines and Automotive Engineering, Vienna University of Technology
  • OMV Refining and Marketing
  • Repotec
  • Biomass Power Plant Güssing